EMI3410I products are new breakthrough all-in-one devices which integrate encoding (MPEG-2 HD/SD, MPEG-4/AVC H.264 HD/SD)
EMI3410 products are new breakthrough all-in-one devices which integrate encoding (MPEG-2 HD/SD, MPEG-4/AVC H.264 HD/SD) and modulating to convert V/A signals into DVB-C(DVB-T/ISDB-T/ATSC-T) RF output. It has equipped with up to 4 HD (4 SDI optional) channels input and 1 ASI input and output with 2 ASI ports and 1 UDP IP port.
Delay problem has been greatly reduced to achieve an extremely low value from the encoding progress to the decoding terminals.
It adopts inner drawer-type structural design which greatly facilitates the change of encoding modules (HD/SDI…) as needed.
The signals source could be from satellite receivers, closed-circuit television cameras, Blue-ray players, and antenna etc. Its output signals are to be received by DVB-C TVs or STBs.
◆MPEG-2 and MPEG-4 AVC video encoding of HD or SD per chassis (1RU)
◆Based on the latest ASIC and FPGA technologies, offers unequalled gains in video compression efficiency
◆Single/Dual/Qua HD or HD-SDI video input
◆1080P(H.264 only), 1080I, 720P, 480I and 576I@50, 60Hz video resolution
◆MPEG1 Layer II, AC3 passthrough, AAC audio encoding
◆Low latency mode
◆PSI/SI generate and NIT insertion, LCN modify
◆Selectable 1, 2, 4 multi-Modulation out (DVB-C/T/ISDB-T/ATSC-T)
◆MPEG-TS over UDP, Indentical ASI Output
◆Cascading via DVB-ASI or RF Port
◆Excellent modulation quality MER≥42dB
◆RF frequency: 30-960MHz, 1khz step
◆Simultaneous outputs via IP, DVB-ASI and modulated interfaces
◆Easy to web management
◆Breakthrough Low Price