MOD6420 professional DVBT T Modulator


2.One channel asi and 100M ip input

3. Transfer bandwideth :5M,6M,7M and 8M

Product Details


    MOD6420 DVB-T modulator is our new product developed complying with the DVB-T standard. With its advanced modulating technology, this modulator can effectively make use of the ground spectrum resources and make it possible to provide reliable signals for fixed, mobile and portable devices. Compared with DVB-T, the channel capacity is increased by 30% under the similar carrier to noise ratio (CNR) threshold.

     It has been designed to provide a cost effective and high quality solution for broadcast network operators, system integrators and transmitter manufacturers aiming to deploy digital TV services over DVB-T networks.

    MOD6420 supports all DVB-T modulation features including T 2-Modulator Interface  interface support, mono and multiple Physical Layer Pipes (PLPs),  and SISO/MISO transmission through its ASI and IP port.

    Moreover, this device can be upgraded and controlled through network system, which allows it to be widely used in setting up digital broadcasting network and provide good signals for scientific laboratory and DVB-T STB. 


 Fully complying with EN302 755 standard

◆ 4 ASI input ports (for 1 channel TS input with 3 ports for backup)

 TS over IP input (UDP)

 10MHz input/loop out, 1PPS input/loop out

 DVB-T RF output

 Supports mono PLP

◆ MISO and SISO supported

 Support QPSK/16QAM/64QAM/256QAM (normal or rotated)

 Support TS format: TS (Mode A)

 High performance output: MER>43dB, shoulder level>56dB

 Output signal bandwidth: 5M, 6M, 7M, 8MHz

 Support MFN net mode

 Supports non-linear and linear digital pre-distortion (DPD) (option)

 RF output level: -25 ~ +3 dBm, 0.1db stepping

 Constant temperature crystal oscillator, as high as 0.1ppm stability

 Support online upgrade

 Keyboard operation and LCD display

 Web Network management system (GUI)


You Might Also Like